By smileman - 7 Apr 2010
Hi,
I have an original G4 Freelander used in the 2003 race. It still has the original Safety Devices rack and I just acquired a set of four Warn SDB-160 lights that I'll be mounting to the rack.
Does anyone know the wiring from the lamps was run to the relay box in the engine compartment? I see that there is a small cutout in the base of the safety devices "rack bib" on the passenger side. I'm wondering if the wiring was run through that hole and down into the engine compartment along (or inside) the snorkel? It would appear that's the case in these photos:
http://cid-fe56992fd58cc3e9.skydrive.live.com/browse.aspx/G4%20Freelander?sa=95407225
Although it's strange as it appears the wire for the rear worklamp is attached to the outside of the snorkel?
If they ran the wiring through the snorkel does anyone know where they cut the exit hole in the snorkel, without defeating the whole purpose of the snorkel?
Many thanks!
|
|