Disco II Lighting question

Author	Message
beck66	b beck66 posted 6 Years Ago Post Details
b Group: Forum Member Posts: 2, Visits: 1	The hexagonal connector I bought here before
	Reply Like 0
beck6	b beck6 posted 6 Years Ago Post Details
b Group: Forum Member Posts: 1, Visits: 2	If you need more connectors, then I can recommend you to go here. https://www.allicdata.com/list.html?category_id=1608
	Reply Like 0
DannyBalls	DannyBalls posted 16 Years Ago Post Details
Group: Past Forum Member Posts: 92, Visits: 524	I have not painted the vehicle as of yet. The front bumper covers are peeling and will need to be addressed in the future. I look at those blemishes as "character". I will most likely touch up those spots after I can find sump and fuel tank guards.
	Reply Like 28
martin bisby	martin bisby posted 16 Years Ago Post Details
Group: G4 Member Posts: 657, Visits: 2.7K	Danny, looking good, do i recall you having a respray on the vehicle some time ago? top marks to adrian for the links and info regards martin 2003 Stage 3 Event Vehicle D2 V8i ES Founding Chairman G4 Owners Club
	Reply Like 26
DannyBalls	DannyBalls posted 16 Years Ago Post Details
Group: Past Forum Member Posts: 92, Visits: 524	My restoration project is moving forward. I purchased a set of SDB 160's and installed them over the weekend on the winch carrier. Had them wired up and all is good. I actually picked up the lamps for $340 US (290 GBP) from streetsideauto.com. The lamp controllers are mounted next to the binnacle. I am almost there with the rest of the restoration project. Thanks to Adrian for his helps on the connectors. I spoke with Tyco and oredered a few samples and should receive them in the next few weeks.The only components I am missing are the fuel tank and sump protection units. I will post pics once I learn how to reduce the file size. Attachments controllers.jpg (132 views, 57.00 KB) front.jpg (142 views, 65.00 KB)
	Reply Like 30
davezrx	davezrx posted 16 Years Ago Post Details
Group: G4 Member Posts: 1.9K, Visits: 7.7K	danny look back for event pictures of shows this year and find ants d2 [was brain reynolds].or just pm ant ,im sure there the same DISCOVERY 2 G4 LE DAVE G4 committee merchandising officer 2010 -2016
	Reply Like 27
DannyBalls	DannyBalls posted 16 Years Ago Post Details
Group: Past Forum Member Posts: 92, Visits: 524	Before I purchase the set of SDB 160 HB's for the winch, I need to confirm that all six lamps are the same. Were the SDB 160 HBE's used on the DII's at all? If so, does anyone know the location (winch or rack mount)? From what I can tell The HB's are a driving / spot lamp while the HBE's are a driving / fog lamp.
	Reply Like 28
The OC (Augusto)	The OC (Augusto) posted 16 Years Ago Post Details
Group: G4 Member Posts: 890, Visits: 3.6K	Great effort Adrian, well done!:) Augusto (The O.C.) Secretary - G4 Challenge Owners Club D3 2006 event BN55 WRG LRG4C11 Stages 3 & 4 Bolivia
	Reply Like 29
Stonk101	Stonk101 posted 16 Years Ago Post Details
Group: Forum Member Posts: 24, Visits: 935	Great thanks, Regards Toby G4 Disco, 110, 101, RR (old but great fun) Help for Heros Rally http://threewisemonkeysandakeeper.com/ http://www.tlsfx.co.uk/
	Reply Like 29
adesg4	a adesg4 posted 16 Years Ago Post Details
a Group: G4 Member Posts: 1.2K, Visits: 6.8K	I have now managed to find the correct part numbers for these 6 way male and female connectors. They are 6 way tab housing P/No. 344265-1 6 way yellow anti-backout P/No. 345259-1 6 way female housing P/No. 344267-1 6 way yellow female anti-backout P/No. 345260-1 The relevant contacts and wire seals are shown in the attached pdf. You will need to measure the wire size to select Part Numbers as these depend on the wire size. Please send me wire size and part numbers when measured. These parts are made by tycoelectronics who own AMP. Link here goes to relevant page. http://www.tycoelectronics.com/catalog/menu/en/17685?BML=10576,17560 Type in part numbers to search box. If you need to source them they are available in the UK from Dalroad Norslo, Luton, Bedfordshire Tel: 01582-505252 or Flightspares Electronics, Essex Tel: 01702-533800 You may need a special crimping tool to fit the connector spades. Let me know outcome. Thanks Adrian Technical Officer G4 Owners Club D110 - Mongolia 2008 - 1925YbA - Recce D2 - Australia 2003 - 1BIJ-664 - Australia/ Russia Media car. Fleet 104 Attachments WIRING CONNECTORS CAT_889740_Page_131.pdf (113 views, 22.00 KB)
	Reply Like 28