Freelander problem

Author	Message
Ianawilliams	Ianawilliams posted 17 Years Ago Post Details
Group: Forum Member Posts: 11, Visits: 23	had a look at the turbo hoses and there all fine, no splits in them. so think its a clutch problem, just think its wierd how it works ok in 1st, 2nd but as soon as i put my foot down in 3rd it sounds like your really slipping the clutch out, and then binds. Ive never had this problem before, ive always had landrovers, and the last time it happened there was a bang and complete loss of drive. How hard is it to do a clutch on a freelander? only ever done a discovery. Thanks for all the input.
	Reply Like 33
Blippie	B Blippie posted 17 Years Ago Post Details
B Group: Past Forum Member Posts: 86, Visits: 247	What engine are we talking about here? The V6 doesn't have a turbo, does it? The TD4 is a great engine, and for uncharacteristic loss of power, rough running and unresponsiveness, people are right to point you towards split turbos, faulty MAF sensors (the give away is that when plugged into a testbook computer, a failed MAF gives no indication of a fault) etc. It's also worth checking the cam sensors in these cases. www.tuning-diesels.com is an odd looking website but full of useful tidbits about the TD4 (and the earlier L-series diesel) from "Roverron". Nevertheless, the "revving but no increase in speed" sounds clutchy, doesn't it? Cheers Blippie :: www.horse-back.co.uk :: www.cameltrophyvehicles.com :: www.unison-greatwestern.co.uk :: www.blippie.co.uk ::
	Reply Like 29
Ianawilliams	Ianawilliams posted 17 Years Ago Post Details
Group: Forum Member Posts: 11, Visits: 23	Ok, will do, gonna have a look this evening
	Reply Like 34
yakman	yakman posted 17 Years Ago Post Details
Group: Forum Member Posts: 50, Visits: 471	Hi just one more thing inspect your flexable hoses to the turbo for splits or cracks ,i seam to to remember a split wood cause similar problems and can be intermitent regards tony
	Reply Like 32
Ianawilliams	Ianawilliams posted 17 Years Ago Post Details
Group: Forum Member Posts: 11, Visits: 23	Thanks for all your replys. Hasnt done it again since this morning, i'll keep you posted.
	Reply Like 34
Pete.D	Pete.D posted 17 Years Ago Post Details
Group: Forum Member Posts: 27, Visits: 4K	If you are driving a TD4 freelander and you are also suffering with poor acceleration ie feels like little or no power,I suggest you try the air flow/air mass meter.They are prone to failure ,Testing the fault is easy and if this turns out to be at fault will cost you a lot less than a new clutch. Regards Peter. P.J.Dale.
	Reply Like 32
Ianawilliams	Ianawilliams posted 17 Years Ago Post Details
Group: Forum Member Posts: 11, Visits: 23	I seriously hope it isnt a clutch problem. Thats expensive!!! Doesnt smell like the clutch though, ive been driving it this afternoon trying to get it to do it again but wont have it. Can anyone think of anything else?
	Reply Like 32
macg4	m macg4 posted 17 Years Ago Post Details
m Group: G4 Member Posts: 404, Visits: 10K	hi i,ve just had the same prob clutch went and the fly wheel :w00t: you'll have heart failure if you go to LR price in the end was £810.00:pinch: andy BT52CLO V8 D2 Australia Gone FL1 td4 g4 BW04 FGV(Brazil)
	Reply Like 27
jimcarr	j jimcarr posted 17 Years Ago Post Details
j Group: Past Forum Member Posts: 147, Visits: 909	Sounds like a clutch problem to me, if the engine revs up but you don't accelerate, could be a slipping clutch! Cheers Jim Carr *Member, G4 Challenge Owners Club* 2006 G4 RRS, 2003 G4 DII, 1998 Paris/Dakar D1, 101FC, SIIa, FL2 i6
	Reply Like 25
Ianawilliams	Ianawilliams posted 17 Years Ago Topic Details
Group: Forum Member Posts: 11, Visits: 23	Hi, bit confused, when i put my foot down to get the turbo working im loosing power to the wheels engine revving like it wants to go but hasnt got the forward momentum saty overtake a car, no black smoke or anything like that, the clutch has been replaced 9 months ago. Maybe it could be the turbo or the hoses, anybody got any ideas. Cheers
	Reply Like 25